Single Surface Specifications

Adjustability Features: Two crank height control worm gear mechanisms (in left and right leg uprights) constructed of one-piece, machined and polished stainless steel, with Acme thread according to DIN 17100. It is vertically mounted to include the 7mm hex head fitting for crank handles. The unit is fitted with sinter metal gear wheel and axial grooved ball bearings and transversed between the two leg mechanisms by a self lubricating bicycle link chain type 25 ASA. Crank handles are positioned either on the left or right (user preference) at a location where the rotation of the handle and user's hand is free from obstructions (alternate surface, side positioned tables, adjacent panels or walls). The adjustment ratio is 6.5 turns per inch. Every crank table is manufactured with our unique Power Exchange Outlet (PXO). At anytime an inexpensive field installed (and replaceable) motor and toggle switch can be easily added. All tables are fitted with 1" leveling glides on the feet.

Manual tables cannot be upgraded to either crank or electric. They have a leg rule and locked into position with knob activated pressure fit screws. All crank tables can be ordered with electric controls or later upgraded.

Maximum Weight Load: All tables are life tested to ANSI BIFMA standards utilizing a static weight load of 400 lb, The final design permits a 5th percentile female worker to adjust the tables from a seated position with a minimum sustained force of less than 5.5 psi with a 175 lb load on bilevel surfaces and 220 lb. load on single surface tables. To maintain this performance standard and offset the top's weight, the 60" table contains one 500 Newton gas spring fitted to the leg upright.

Wire Management: All tables contain integrated wire management including grommet outlets through the surface, a horizontal trough containment below the surface and our trademark expanded leg covers which remove for the vertical channeling of cables and the separation by leg of the power and data lines to avoid transmission inteference.

Added Features: All single surface tables can be used in conjunction with SIS monitor arms, either edge clamp, with optional clamps for mounting and pod systems, or grommet hole mounted. The surfaces can be adjusted to best suit keyboard height, digitizer, source documents, etc. The monitor is independently adjustable for the terminal. This combination does not interfere with critical leg space like an articulating or drawer extending keyboard unit. The worksurface is clear.